- Other Fluke companies:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
See more Fluke brands
Calibrate power quality to the most exacting standards
The 5520A-PQ option enables the 5520A Multi-Product Calibrator to calibrate power quality instrumentation to the standards of the IEC and other regulatory agencies. Three precision waveform modes provide traceability for power meters, disturbance analyzers, power quality monitors, recorders and other power quality related equipment.
The PQ option increases the 5520A’s already impressive workload coverage, flexibility and ease of use. This is a rugged, portable instrument, ideal for use both in the field and on the bench. It is also affordable, allowing you to match your configuration to your workload and add options as that workload changes and grows.
The 5520A-PQ option can be ordered factory installed with a new calibrator or added to your existing 5520A at a local Fluke Calibration Service Center.
Three power quality modes are packed with features
The three power quality waveform modes in the 5520A-PQ include Composite Harmonic, Flicker Simulation, and Sags and Swells Simulation. These waveforms are available in either the single output mode (voltage or current) or dual output modes (voltage + current and voltage + voltage). The modes provide traceability for harmonic analysis, flicker, and sags and swells functions of power quality measurement instruments.
The PQ option adds powerful new functionality to the 5520A:
|
As in all 5520A calibrators, these functions also address your power calibration requirements:
|
Composite Harmonic Mode
This mode outputs a user defined waveform with up to 15 harmonics, from the 2nd up to the 63rd, that are combined with the fundamental. Both amplitude and phase of each harmonic, relative to the fundamental, can be specified. In the dual output modes (voltage + current and voltage + voltage), the wave shapes are independent of each other, but synchronized in time with 0.01 º phase resolution. Up to two user defined waveforms can be stored in non-volatile memory for easy recall. Two IEC 10003-2 waveforms (Class A and Class D current harmonic limits) are pre-defined for CE compliance testing.
Flicker Simulation Mode
Flicker simulation performs either a rectangular or sinewave amplitude modulation of the voltage or current output. The repeat frequency or repetition rate of the flicker event is programmable from 0.1 Hz to 30.0 Hz. The duty cycle of the flicker event relative to the nominal amplitude is programmable, giving true modulation of the output signal. Duty cycle ranges from 1 % to 99 %. The amplitude of the flicker event is programmable from +100.0 % of the base waveform. To check the IEC 61000-415 flicker function of power quality analyzers, six combinations of delta voltages and change frequencies are provided to quickly check for a Pst (Perceptionshort term) of 1.
Sags and Swells Simulation Mode
Sags and Swells simulation performs a one-time amplitude modulation of the voltage or current output. The amplitude is programmable from +100 % of the base waveform. The duration of the sag (also referred to as dip) or swell is adjustable from 0.005 to 60.000 seconds. The ramp period of the sag or swell may also be specified. The Sag and Swell event can be adjusted to occur from 0.0 to 99.999 seconds after the trigger event.