- Other Fluke companies:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
See more Fluke brands
GFS™ delivers a true Primary Mass Flow Standard and makes the fundamental measurement of low gas mass flow rates in flow control systems practical. GFS primary mass flow measurements offer very low uncertainty values for independent metrology support of precision transfer standards like molbloc-L and molbloc-S, used for gas flow controller and other gas flow controlling device calibrations.
- Covers the range of 0.2 to 200 mg/s in various gases (10 sccm to 10 slm N2)
- Supported gases: Non-corrosive, non-toxic gases
- Flow measurement uncertainty as low as ± 0.013% of reading
- Maximum outlet pressure: 650 kPa absolute
- Primary gravimetric principle using mass and time measurement
- Automated unattended operation possible
The GFS dynamic gravimetric mass flow calibration system consists of an electronic mass balance, enclosure, and electronic instruments required to make accurate real-time measurements of depleted
gas mass in flow control systems, and the time duration over which it has run. In order to improve thermal stability and dampen vibrations, the balance is placed upon a large granite plate and surrounded by a draft enclosure. In this system the test gas is supplied by a pressurized cylinder which rests on the balance and whose mass is measured continuously to determine the quantity and rate of depleted mass during a test. The elapsed time over which this takes place is measured by a high-speed USB counter/timer connected to the system controller. Various non-corrosive gas species can be used with this system, simply by evacuating the reference cylinder and pressurizing with the media of choice.
A dedicated PC-based software program (GFSTools™) has been developed to act as the central control of the instrument and interface to the user. Discrete and averaged values of balance and device under test output are recorded and the results are calculated and displayed in terms of total mass and mass flow. Compensation of measurements for ambient pressure, temperature, and humidity, and balance drift are all performed by GFSTools. Automated test setup, data reporting and flow control are also handled by the program.
GFS General Specifications |
||
| Power Requirements | ||
| Balance | 100 to 240 VAC, 50 to 60 Hz, 27 W max. consumption | |
| LCM | 100 to 240 VAC, 50 to 60 Hz, 40 W max. consumption | |
| MFC-CB | 85 to 264 VAC, 50 to 60 Hz, 36 W max. consumption | |
| Operating Temperature Range | 15 to 25 °C | |
| Humidity Range | 5 to 70% RH, non-condensing | |
| Weight | ||
| Granite table and stand | 320 kg (700 lb) approximate | |
| Rest of system | 70 kg (150 lb) approximate | |
| Dimensions | ||
| Enclosure on Granite Table w/stand | 150 cm H x 90 cm W x 60 cm D (58 in. x 36 in. x 24 in.) | |
| LCM | 8 cm H x 22.5 cm W x 20 cm D (3.1 in. x 8.9 in. x 7.9 in.) | |
| MFC-CB | 8 cm H x 22.5 cm W x 20 cm D (3.1 in. x 8.9 in. x 7.9 in.) | |
| GFS-FS | 20 cm H x 41.4 cm W x 20 cm D (7.9 in. x 16.3 in. x 7.9 in.) | |
| Supported Gases | Nitrogen (N2), Air, Argon (Ar), Carbon Monoxide (CO), Helium (He), Oxygen (O2), Carbon Dioxide (CO2), Carbon Tetrafluoride (CF4), Ethane (C2H6), Ethylene (C2H4), Fluoroform (CHF3), Hexafluoroethane (C2F6), Hydrogen (H2), Methane (CH4), Nitrous Oxide (N2O), Sulfur Hexafluoride (SF6), Xenon (Xe) | |
| Flow Measurement Range | at least: | |
| He, H2 | 100 sccm to 10 slm | |
| All other gases | 10 sccm to 10 slm | |
|
Pressure Connections outlet flow path from enclosure |
1/8” Swagelok tube fitting or equivalent, with adaptor to 1/4” Swagelok tube fitting or equivalent | |
| Reference Gas Cylinder Pressure Limit | 20 MPa (3000 psi) | |
| CE Conformance | Available, must be specified. | |
| Product Manuals |
|---|
GFS2102™ Operation and Maintenance Manual (5.46 MB) |
| Application Notes |
|---|
|
Typical Measurement Uncertainty in Gas Flow Measured by GFS2102 Gravimetric Flow Standard (76.28 KB) |
| Software |
|---|
| GFSTools PC Based Software |
| Instruction Sheets |
|---|
|
Installation of Regulator Assembly onto GFS2102 Reference Gas Cylinder Instruction Sheet (106.51 KB) |
| Papers / Articles |
|---|
|
A Primary Calibration System for the Support of High Performance Gas Flow Transfer Standards (91.76 KB) |