How to do a temperature sensor comparison calibration

Here’s how to do a simple comparison calibration of a probe-style RTD at one temperature point using temperature sensor calibration equipment, a dry-block calibrator in this case.  Fully insert the probe RTD into one of the dry-block insert holes and connect the cable to an RTD temperature readout.  Ramp the dry block to 100 ºC (212 ºF).  When the dry-block display shows a stable 100 ºC, record the value of the RTD temperature readout.  You now have one data point to compare the RTD temperature on the readout to the dry-block calibrator which is being used as a stable measurement reference standard.  A typical sensor calibration would be done at several temperature points that span the working range of the sensor when used in a production environment

For a higher accuracy calibration, a reference PRT connected to a thermometer readout could be inserted into another of the dry-block insert holes.  In this case, the PRT which has a higher accuracy than the internal display of the dry-block calibrator is used as the reference standard and compared to the reading of the RTD temperature readout. 

See related products

Platinum Resistance Thermometers (PRTs)

Temperature calibrators

Data Acquisition

Keep learning

Platinum Resistance Thermometers (PRT) (App Note)

Selecting a dry-block calibrator (Blog)

How to Calibrate an RTD or Platinum Resistance Thermometer (PRT) (App Note)

Annealing a PRT: Why, When and How (Webinar)

Get Help

Customer & technical support

Speak with a calibration product expert about your probe and equipment needs