- Other Fluke companies:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
See more Fluke brands
5141- 5142 -5144 molbox RFM ガス流量校正キット
This product is discontinued. Recommended replacement is:
High end gas flow calibration made simple
Fluke Calibration 5141, 5142 and 5144 molbox RFM gas flow calibrator kits feature molbox RFM and molbloc-L configurations optimized to cover a very wide workload combined with molstic-L and other interconnect hardware needed for a complete calibration system. Simply supply 90 psi of pure N2 or air to the system. An included regulator delivers a stable regulated flow to the molbloc. Downstream of the molbloc, an included metering valve allows you to regulate the mass flow value required for the DUT. It’s that simple; supply 90 psi gas upstream, tare the reading, and adjust the fine metering valve to deliver the desired mass flow rate with an accuracy of ± 0.5 % of reading. Fluke Calibration gas flow calibrator kits eliminate complication, but don’t compromise molbox/molbloc best in class performance.
- Flow ranges cover from 1 sccm to 50 slm
- ± 0.5 % of reading total one-year accuracy
- Measures mass and volume flow with user settable reference pressure and temperature conditions
- Reference standard is upstream of the device under test, eliminating cross contamination and expensive damage to the flow elements
- Integrated gas flow regulation and adjustment hardware
- Expandable to over 5000 slm with additional molbloc flow elements and control hardware
- Includes traceable calibration for operation in N2 and Air, with corrections for other gases
- Gas supply and test adapters included for 1/4 in tube, 1/4 in NPT and 1/4 in BSP
- Includes advanced functions such as totalize, average, hi/lo, deviation, on-board purge, leak test and tare, available from the front control panel or by RS-232 and IEEE-488 remote interfaces
A new standard in high end gas flow calibration
Fluke Calibration revolutionized high end gas flow calibration with the introduction of molbox/ molbloc mass flow standards. molbox/molbloc systems have replaced large, inflexible, error prone volumetric piston provers and bell provers with a compact, easy to use, versatile digital standard. molbox/molbloc systems are the standard of choice for high end calibration labs and mass flow device manufacturers around the world. Improvements offered by molbox/molbloc include:
- True mass flow calibration and traceability— no corrections from volumetric to mass
- Real-time digital mass flow indication, loaded with features—easily automated
- No moving parts—uninterrupted gas flow measurement, no fluctuations from piston stroke
- Flexibility to be positioned upstream or downstream— can calibrate at many line pressures
- Modular components allows future upgrade and expansion
- Very wide range with small footprint—no flow straightening hardware required
Whether your requirement is manual calibration of a simple variable area flow meter (rotameter) or fully automated calibration of a mass flow controller (MFC), molbox/molbloc systems offer the ideal solution. A molbox RFM with one or more molbloc flow elements can cover a wide range of flow calibration devices with total one-year measurement uncertainty of ± 0.5 % of reading. If your needs change, molbloc flow elements can be added, with models covering flows from 1 sccm to over 5000 slm (175 scfm). If better measurement uncertainty is needed, the same flow elements can be used with molbox1+ to achieve accuracy as good as ± 0.125 % of reading.
Measurement specifications |
|
| Gas calibration included | Nitrogen (N2), Air |
| Maximum working measurement line pressure | 600 kPa (87 psi) absolute |
| Measurement range | <1sccm to 50 slm, depending on model. Flow ranges depend on test gas. Ranged indicated for N2 and Air. |
General specifications |
|
| Power requirements | 85 V ac to 264 V ac, 47 Hz to 440 Hz, 18 VA max consumption |
| Normal operating temperature range | 15 °C to 30 °C (59 °F to 86 °F) |
| Storage temperature range | -20 °C to 70 °C (-4 °F to 158 °F) |
| Vibration | Meets MIL-T-28800D |
| molbox RFM weight and dimwnsions |
2.55 kg (5.6 lb) max 8 cm x 22.5 cm x 20 cm (3.1 in x 8.9 in x 7.9 in) approx |
| molstic with molbloc weight and dimensions (max) |
9 kg (20 lb) 19 cm x 81.28 cm x 15.25 cm (7.5 in x 32 in x 6 in) approx |
| Supply gas required |
99.998% pure N2 or Air regulated to 90 psig (600 kPa) Note: a fine pressure regulator is included, but an additional regulator (not included) may be required to reduce pressure supplied to the 514X kit to approximately 90 psi |
| Gas calculations reported | Nitrogen (N2), Air, Argon (Ar), Carbon Monoxide (CO), Helium (He), Oxygen (O2), Carbon Dioxide (CO2), Carbon Tetrafluoride (CF4), Ethane (C2<;/sub>H6), Ethylene (C2H4), Fluoroform (CHF3), Hexafluoroethane (C2F6), Hydrogen (H2), Methane (CH4), Nitrous Oxide (N2O), Propane (C3H8), Sulfur Hexafluoride (SF6) |
| Flow connections for gas supply and device under test | 1/4 in tube with adapters included for 1/4 in NOT and 1/4 in BSP |
| 製品マニュアル |
|---|
molbox™ RFM™ Operation and Maintenance Manual (1.59 MB) |
|
molbox™ RFM™ Operation and Maintenance Supplement (46.05 KB) |
| データ・シート |
|---|
|
5141 / 5142 / 5144 molbox RFM Gas Flow Calibrator Kits Technical Data (2.15 MB) |
|
molbox RFM Reference Flow Monitor Technical Data (1.71 MB) |
|
molbox1+™ Flow Terminal Data Sheet (1.92 MB) |
| ソフトウェア |
|---|
| COMPASS for Flow PC Based Software Download/Upgrade |
| COMPASS for molbox PC Based Software Download/Upgrade |
| ファームウェア |
|---|
| molbox RFM™ v1.20d Embedded Software |
| LabView ドライバー |
|---|
| LabVIEW Drivers, Pressure and Flow Calibration Products |
| フリー・ユーティリティ |
|---|
| CalTool for RPTs Free Utility |
| molLoad Free Utility |