5608, 5609 Secondary Reference PRTs

Very stable thermometer from –200 °C to 670 °C

5608: –200 °C to 500 °C (80 mm minimum immersion)
5609: –200 °C to 670 °C (100 mm minimum immersion)
NVLAP-accredited calibration, lab code 200348-0
Dry-well reference with 90 ° bend

If you want a very stable thermometer from –200 °C to 670 °C and are particular about the calibration, then look no further than our 5609 Secondary Reference PRT. Its short-term stability at the triple point of water is only ± 7 mK and its one-quarter inch (6.23mm) diameter lets you get accurate measurements in only 100 mm of immersion.

The 5608 is also a ± 7 mK probe at the triple point of water, but its one-eighth inch (3.18 mm) diameter gets you accurate measurements from –200 °C to 500 °C with only 80mm (3.1 in) of immersion. With multiple sheath length options on both of these probes, you can find the dimensions that are just right for your specific application.

The 5608 comes with a one-eighth inch (3.18 mm) diameter sheath in lengths of 9 inches or 12 inches. The 5609 comes with a one-quarter inch (6.35 mm) diameter sheath in lengths of 12 inches, 15 inches, and 20 inches; or with a 6 mm diameter in lengths of 300 mm, 400 mm, or 500 mm.

When looking for improved response time and reduced stem effect in shallow immersion, look for small diameter probes, because the measurement error called stem effect is caused by the diameter of the stem rather than the length of the stem.

Both of these probes have Inconel™ sheaths and are made using a special manufacturing process, giving them great precision over a wide temperature range. The sensors for these probes are reference-grade platinum and feature four-wire connections with less noisy measurements than two-wire counterparts.

On the report of calibration, you’ll get the test data and the ITS90 calibration coefficients that you can easily input into any Fluke Calibration thermometer. If you order your probe with an smart connector, we’ll program the coefficients directly into your connector, which loads the coefficients for you when you plug it into our 1524 Handheld Thermometer.

Specifications

Temperature range

5608: –200 °C to 500 °C
5609: –200 °C to 670 °C

Nominal resistance at 0.01 °C

100 Ω ± 0.5 Ω

Temperature coefficient

0.0039250 Ω/Ω/°C

Relative Accuracy^[1]

± 0.007 °C at –200 °C
± 0.008 °C at 0 °C
± 0.020 °C at 420 °C
± 0.027 °C at 660 °C

Short-term repeatability^[2]

± 0.007 °C at 0.010 °C
± 0.013 °C at max temp

Drift^[3]

± 0.01 °C at 0.010 °C
± 0.02 °C at max temp

Hysteresis

± 0.01 °C maximum

Sensor length

30 mm ± 5 mm (1.2 in ± 0.2 in)

Sensor location

3 mm ± 1 mm from tip (0.1 in ± 0.1 in)

Sheath material

Inconel™ 600

Minimum insulation resistance

5608: 500 MΩ at 23 °C, 20 MΩ at 500 °C
5609: 500 MΩ at 23 °C, 10 MΩ at 670 °C

Transition junction temperature range^[4]

–50 ºC to 200 °C

Transition junction dimensions

71 mm x 12.5 mm (2.8 in x 0.49 in)

Minimum immersion length^[5]
(<5 mK error)

5608: 80 mm (3.1 in)
5609: 100 mm (3.9 in)

Maximum immersion length

305 mm (12 in)

Response time^[5]

5608: 9 seconds typical
5609: 12 seconds typical

Self heating (in 0 °C bath)

5608: 75 mW/°C
5609: 50 mW/°C

Lead-wire cable type

PTFE 24 AWG

Lead-wire length

1.8 m (6 ft)

Lead-wire temperature range

–50 °C to 250 °C

Calibration

^[1] Includes short-term repeatability and 100 hr drift. Calibration will add additional uncertainties.

^[2] Three thermal cycles from min to max temp, includes hysteresis, 99.9 % confidence (k=3)

^[3]After 100 hours at max temp, 99.9 % confidence (k=3)

^[4] Temperatures outside this range will cause irreparable damage. For best performance, transition junction should not be too hot to touch.

^[5] Per ASTM E 644

Calibration Uncertainty for NVLAP-accredited† calibration
Temperature	Expanded Uncertainty (k=2)
–197 °C	0.025 °C
–80 °C	0.025 °C
–38 °C	0.025 °C
0.01 °C	0.025 °C
156 °C	0.030 °C
231 °C	0.030 °C
419 °C	0.035 °C
660 °C	0.050 °C
Note: Calibration uncertainties depend on the uncertainties of the lab performing the calibration. Subsequent calibrations of this probe performed with different processes, at different facilities, or with changed uncertainty statements may state different uncertainties. †Lab code 200348-0

Model Name	Description
5608-9-X	Secondary Reference PRT, 9 in x 1/8 in, –200 to 500 °C, lead wire (cable) 6 ft X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).
5608-12-X	Secondary Reference PRT, 12 in x 1/8 in, –200 to 500 °C, lead wire (cable) 6 ft X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).
5609-12-X	Secondary Reference PRT, 12 in x 1/4 in, –200 to 670 °C, lead wire (cable) 6 ft X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).
5609-20-X	Secondary Reference PRT, 20 in x 1/4 in, –200 to 670 °C, lead wire (cable) 6 ft X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).
5609-300-X	Secondary Reference PRT, 300 mm x 6 mm, –200 to 670 °C, lead wire (cable) 6 ft X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).
5609-400-X	Secondary Reference PRT, 400 mm x 6 mm, –200 to 670 °C, lead wire (cable) 6 ft X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).
5609-500-X	Secondary Reference PRT, 500 mm x 6 mm, –200 to 670 °C, lead wire (cable) 6 ft X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).
5609-9BND	Secondary Reference PRT, 15 in x 1/4 in, 9 in bend, –200 °C to 670 °C, lead wire (cable) 6 ft X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).

Accessories common to all models:

Accessory	Description
2601	Probe Carrying Case, Plastic (for probes up to 228 mm [9 in] in length)
2609	Probe Carrying Case, Plastic (for probes 635 mm [25 in] in length)
1930-4-R	System Calibration by Comparison for 5608 and 5609 PRTs, -200 °C to 500 °C, NVLAP Accredited (probe and thermometer readout combined as a system)
1930-4-7	System Calibration by Comparison for 5609 PRTs, -200 °C to 660 °C, NVLAP Accredited (probe and thermometer readout combined as a system)

Product Manuals
5608/5609 Platinum Resistance Thermometer User’s Guide (English) (156.46 KB)

Application Notes
Establishment of a Secondary Temperature Calibration Laboratory (3.09 MB)
How to Calibrate an RTD or Platinum Resistance Thermometer (PRT) (652.16 KB)
Kalibrieren eines RTD oder Platin-Widerstandsthermometers (PRT) (German) (828.03 KB)
Comment étalonner unde sonde RTD ou sonde à résistance de platine (PRT) (French) (834.22 KB)
Cómo calibrar una RTD o un sensor de temperatura (Spanish) (819.7 KB)
Temperature measurement and calibration: What every instrument technician should know (1.65 MB)
Temperaturmessung und -kalibrierung (German) (650.54 KB)
Mesure et étalonnage thermique (French) (655.57 KB)
Medición y calibración de temperatura (Spanish) (651.42 KB)
Why Use a Triple Point of Water? (1.19 MB)
Does Immersion Depth Really Matter? (745.44 KB)

Data Sheets
Secondary PRT with Calibration Options Technical Data (152.81 KB)

Papers / Articles
An Investigation of Long-Term Stability of a Precision Platinum Resistance Thermometer up to 660°C (164.52 KB)
Fixed Points for Secondary Level and Industrial Calibration (496.68 KB)
Fixed Points for Secondary Level Calibrations (560.12 KB)
I Just Got My Probe Recalibrated, Now What?
Methods for Evaluating the Condition of Platinum Resistance Thermometers (130.23 KB)
Platinum Resistance Thermometers (PRT)
Using a Mini Triple Point of Water System to Improve Reliability in a Temperature Calibration Laboratory (177.86 KB)

Printer-friendly version »

|||||

Sidebar Request a Quote

Request a quote

First Name *

Last Name *

Email Address *

Business Phone *

Company *

Country *

State *

ZIP or Postal Code *

Please select a product category for this request

Comments (specify model, quantities, and/or accessories)

Your information is protected by our privacy policy.

5608, 5609 Secondary Reference PRTs

Very stable thermometer from –200 °C to 670 °C

Specifications

Calibration Uncertainty for NVLAP-accredited† calibration

Accessories common to all models:

Sidebar Request a Quote

Products

Services

Resources

Company

Secondary menu

US - English [Change]

5608, 5609 Secondary Reference PRTs

Very stable thermometer from –200 °C to 670 °C

Specifications

Calibration Uncertainty for NVLAP-accredited† calibration

Accessories common to all models:

Sidebar Request a Quote

Products

Services

Resources

Company

Secondary menu